Beko HIC64100 Bedienungsanleitung PDF herunterladen (Seite 11)

11 | EN

problems and invalidation of the

appliance warranty.

Additional protection by a residual

current circuit breaker is

recommended.

If a cable without a plug is provided

together with your appliance;

2. for mono-phase connection, take

care to connect as below:

• Brown cable = L (Phase)

• Blue cable = N (Neutral)

• Green/yellow cable must be

connected to ground (E) line.

3. for two- phases connection, take

care to connect as below:

• Brown cable = L1 (Phase 1)

• Black cable = L2 (Phase 2)

• Blue cable = N (Neutral)

• Green/yellow cable must be

connected to ground (E) line.

Installation

1. Slide the oven through the cabinet

aperture, align and secure.

Installation

1. In hobs whose edges are framed,

apply the sealing gasket provided

in the package to the edges of base

cover of the appliance from below.

2. Place hob into aperture and align it.

3. Connect it to the holes in the lower

housing as indicated in the figure.

For worktops 30 mm thick, install the

brackets as below:

For worktops 40 mm thick, install the

brackets as below:

For worktop thickness’s of less than

30 mm insert a wood spacer between

the bracket and the under surface of

the worktop.

Bottom view (clamp holes)

Secure the hob.

Important

Clamping to different holes is not

a good practice in terms of safety

since it can damage the gas and

electrical system.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare