Beko DC 7130 Bedienungsanleitung PDF herunterladen (Seite 64)

64

EN

programme duration and increase energy

consumption since the drying will be

interrupted continuously. Therefore, it is

recommended to add laundry before the

drying programme has started.

Child-proof lock

There is a child-proof lock to prevent any

programme interruption due to the pressing

of button while the programme is running.

The loading door and all buttons except

the “On/Off” button on the control panel

are deactivated when the child-proof lock is

active.

Press the “Start/Pause/Cancel” and “Cancel

audio warning” buttons simultaneously for 3

seconds to activate the child-press lock.

To start a new programme after the

programme is over or to interrupt the

programme, the child-proof lock should be

deactivated. Press the same buttons for 3

sec. again to deactivate the child-proof lock.

CChild-proof lock is deactivated when the

machine is restarted by pressing the On/

Off button.

C Press the relevant buttons for 3 seconds

to activate the child-proof lock. A long

beep will be heard and the child-proof lock

will be activated. A double beep will be

heard if you press any button or turn the

programme selection knob while the child-

proof lock is active. Press the buttons for 3

seconds to deactivate the child-proof lock.

Single beep will be heard and child-proof

lock will be deactivated.

A A double beep will be heard if you turn

the programme selection knob when the

machine is running and the child-proof

lock is active. If you deactivate the child-

proof lock without returning the program

selection knob to its previous position, the

programme will be terminated since the

position of the programme selection knob

is changed. The drying light turns on and

the machine remains on hold until a new

programme is selected and the “Start/

Pause/Cancel” button is pressed.

Finishing by canceling the

programme

To cancel any selected programme:

Press “Start/Pause/Cancel” button for about

3 seconds. The “Filter cleaning”, “Water tank”

and “End/ Anti-creasing” warning lights will

turn on at the end of this period for reminding

purposes.

A As the inside of the dryer will be excessively

hot when you cancel the programme while

the dryer is running, activate the ventilation

programme to cool it down.

End of programme

The “End/Anti-creasing”, “Filter cleaning” and

“Water tank” warning lights on the programme

follow up indicator will turn on when the

programme comes to an end. The door can

be opened and the machine becomes ready

for a second cycle.

Press “On/Off” button to turn off the dryer.

CFinal step of the drying cycle (cooling step)

is performed without heat application in

order to keep the items at a temperature

that would not harm them.

CA 2-hour anti creasing programme to

prevent laundry from creasing will be

activated if you do not take the laundry out

after the programme has come to an end.

CIf you will not take the laundry out

immediately, do not stop the dryer before

the drying process is complete.

CClean the filter after each drying (please see,

Filter cleaning).

CDrain the water tank after each drying

(please see, Water tank)

1 2 ... 59 60 61 62 63 64 65 66 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare